W Type Rubber Fender

CONTACT

How can we help you?

RELATED PRODUCTS

W fender is one of the most effective fender products at present. This particular design guarantees greater contact area and smaller surface pressure. At the same time, compared with other large fenders, the installation is very simple, and all of them are very popular in the current market. The W fender has been optimized in the past two generations to optimize the detail, make the flatness better, the accuracy higher and the less error.

W-type fenders are designed to withstand and absorb overmuch collisions and impact under extreme conditions. This type of fender is ideal for use on the bow and stern of tugboats, workboats and icebreakers. The groove on the top of the fender offers additional grip and low pressure when pushed. It is easy to be installed due to its two flexible legs with a big or small radius by virtue of guide rods.

Types of W Type Rubber Fender

W fenders are manufactured by rubber of extreme durability with a length usually less than 2000 mm and they are manufactured in the way of compression-moulding. The most general sizes are in stock so that they can be delivered with no delay. W fenders, M fenders and keyhole fenders are non-interchangeable.

Processing of W Type Rubber Fender

It is somewhat not very difficult to install W fenders. The connection is usually done by fixing the pins through two standard holes. W-type fenders come in different lengths and they can be cut at an angle. If the length of the fender exceeds one meter, the opening of the support strip can be increased.

Applications of Rubber W fenders

W fenders can be employed to preserve:

• tugboats

• workboats

• icebreakers

• barges

• supply boats

• corners of wharf

• sections of bridge

OVERVIEW
DOWNLOAD
NEWS

Features of W Type Rubber Fender

special for ships
large contact area and low surface pressure

DolphinRubber's wide-ranging rubber fenders are manufactured in accordance with high-quality standards. We have successfully served for many customs all over the world. We promise the best design and materials for a low maintenance, long service life whatever your working demands and environmental conditions are. Using our exclusive solutions, we can offer you the best way with the least resources.

We believe that with our rich experience, we can offer suggestions to make the most suitable scheme.

For the very best end-to-end solutions, please connect DPNRUBBER Workstation with your full information, or the details or your item, we will give your advice according to your actual situation within 24 hours.

Also, we can design the product size according to the customer's requirements, and optimize the purchasing content for the customers at the same time. We will communicate with customers according to the existing requirements of customers, and understand the exact needs of customers, so as to better provide customers with their products, reduce unnecessary cost expenditures. At the same time, the production time, we through the introduction of automated equipment, optimizing the production process, at the same time to improve the quality of the overall production efficiency by 70%, greatly reducing the delivery time, save a lot of time for customers.

W Type Rubber Fender PDF 736KB

GO TO download center >

Leave a Message